WASH

Aquadry Plus Marine Drying Chamois absorbs more water per pass than any cotton or microfiber alternative — letting you dry an entire mid-size boat in minutes instead of the better part of an hour. Streak-free on glass, gelcoat, fiberglass, and clear vinyl. Reusable across hundreds of wash cycles, machine-washable, and built specifically for the volume of water boats actually carry off after a fresh-water rinse.

What it does

•        Absorbs significantly more water per pass than cotton or microfiber towels

•        Dries a 20–30 foot boat in minutes rather than 30–45 minutes with conventional towels

•        Streak-free on glass, gelcoat, fiberglass, painted surfaces, and clear vinyl

•        Synthetic construction — won't scratch surfaces or leave lint behind

•        Machine-washable for hundreds of cycles before showing wear

•        Reduces water-spot formation by drying surfaces before minerals can set

Specifications

How to use

1.     Rinse the chamois with fresh water and wring out before first use to activate full absorbency.

2.     Glide across wet surfaces in straight passes — let the material absorb rather than scrubbing.

3.     Wring out as it saturates and continue.

4.     After use, rinse with fresh water and hang to dry, or machine-wash on cold without fabric softener.

5.     Store damp in the included container or hang to keep pliable.

Pairs with

Use after washing with Aquatech Boat Wash Concentrate, and after applying Aquatech Glass Cleaner & Protectant for fully spot-free results.

Good to know

•        Do not use bleach or fabric softener — both degrade the synthetic fibers

•        If the chamois dries stiff, soak in fresh water for 5 minutes to restore pliability

•        Replace when absorbency noticeably drops — typically after 12+ months of regular use

•        Safe on all marine surfaces including clear vinyl enclosures

Aquatech Wash Mitt – Scratch-Free Cleaning for a Flawless Boat Finish

Keep your boat’s surface clean and protected with the Aquatech Wash Mitt, a premium 100% cotton blend mitt designed to gently remove dirt and grime without scratching or stripping protective finishes. Whether you're washing gelcoat, fiberglass, or painted surfaces, this ultra-soft, highly absorbent mitt ensures a thorough and safe clean every time.

Perfect for routine maintenance and deep cleaning, the Aquatech Wash Mitt is durable, reusable, and gentle on all marine surfaces. Pair it with Aquatech Boatwash Concentrate for the ultimate streak-free shine and long-lasting protection.

Why Choose Aquatech Wash Mitt?

✅ Soft, 100% cotton blend for a scratch-free clean
✅ Protects gelcoat & painted surfaces while removing dirt & grime
✅ Highly absorbent material for a thorough, even wash
✅ Durable & reusable – perfect for regular boat maintenance
✅ Pairs well with Aquatech Boatwash Concentrate for the best results

How to Use:

1. Soak the wash mitt in a bucket of Aquatech Boatwash Concentrate and water.
2. Gently scrub your boat’s surface to remove dirt and grime.
3. Rinse thoroughly and allow to dry.
4. Wash and reuse for long-term boat care.

Protect Your Boat’s Finish – Order the Aquatech Wash Mitt Today!

Aquatech Boat Wash Concentrate is the wax-safe marine boat soap built for the mess that boats actually collect: diesel smoke, black streaks, salt, and dock grime. The gentle concentrate cleans deeply without stripping wax, polish, or sealant — so every wash removes dirt instead of protection. A little goes a long way: one cap diluted in a 5-gallon bucket cleans a full mid-size boat.

What it does

• Removes diesel smoke, black streaks, salt spray, and general dock grime

• Wax-safe formula won't strip existing wax, polish, or sealant

• Safe for all marine surfaces: gelcoat, fiberglass, metal, vinyl, glass

• Highly concentrated — one cap per 5-gallon bucket

• Reduces water spots and streaking during the rinse

• Biodegradable formula, safe for use at dock and on water

Specifications

How to use

1. Rinse the boat to remove loose dirt and salt.

2. Add one capful of Boat Wash to a 5-gallon bucket of fresh water.

3. Apply with a wash mitt or soft brush, working top-down in sections.

4. For heavier streaks, apply concentrated soap directly to a wet mitt and scrub.

5. Rinse each section before the soap dries.

6. Dry with Aquadry Plus Chamois for a spot-free finish.

Pairs with

Pair with the Aquatech World's Best Wash Bucket, Wash Mitt, and Aquadry Plus Chamois — or save with the Aquatech Essentials Bundle.

Good to know

• One 32 oz bottle yields approximately 30–40 full boat washes at recommended dilution

• Safe for use at dock in most marinas; always verify local rules

• Not a degreaser — for heavy grease or engine areas use Concentrated Marine Cleaner

• Store above freezing

Aquatech Premier Polish is the daily-use polymer polish for boats that already look good and need to stay that way. Unlike compounds, Premier Polish doesn't cut the surface — it cleans, shines, and protects in one step using a polymer-based formula that bonds to gelcoat, paint, and metal. Resists black streaks, acid rain, and spider droppings between washes. The polish you reach for when restoration isn't the goal — maintenance is.

What it does

•        Cleans, shines, and protects in a single application — no compound or pre-step required

•        Long-lasting polymer barrier resists black streaks, acid rain, and spider drops

•        Safe on gelcoat, marine paint, polished metal, and painted aluminum

•        Hand-applied with a wax applicator pad — no machine buffer needed

•        Reinforces the protection of any wax or sealant underneath

•        UV inhibitors slow chalking and fade between full detail sessions

Specifications

How to use

1.     Wash the surface with Aquatech Boat Wash Concentrate and dry thoroughly.

2.     Shake well. Apply a small amount to a wax applicator pad.

3.     Work in overlapping circular motions, covering 2–3 sq ft sections at a time.

4.     Allow to dry to a light haze, then buff off with a clean microfiber towel.

5.     For maximum durability, apply twice per active season.

Pairs with

For heavy oxidation or restoration, start with Buff & Cut Compound and Marine Polishing Compound first. Apply Premier Polish with the Aquatech Wax Applicator Pad. Dry treated surfaces with Aquadry Plus Chamois.

Good to know

•        Designed for maintained surfaces — for chalky or faded gelcoat, restoration compounds are needed first

•        Avoid working in direct sunlight on hot surfaces

•        Safe for use over existing waxes, sealants, and ceramic coatings

Aquatech Ultra High Gloss Marine Polish is a machine-buffer-friendly polymer blend engineered for slow drying and maximum workability. The result: a deep, mirror-like gloss that resists multiple wash cycles without dulling. Works as the finishing step after compound or as a standalone shine enhancer on well-maintained surfaces.

What it does

• Delivers a deep, acrylic-like mirror finish on gelcoat, paint, and fiberglass

• Removes swirl marks, light oxidation, and minor scratches

• Slow-drying polymer formula bonds strongly to the surface for lasting durability

• Withstands repeated wash cycles without losing shine

• Machine buffer compatible for professional results; hand-applicable for touch-ups

• Excellent final step after Buff & Cut Compound or Polishing Compound

Specifications

How to use

1. Wash the surface thoroughly and allow to dry.

2. Shake well. Apply a small amount to a wax applicator or polishing pad.

3. For machine application, spread at low speed, then buff at 1,200–1,800 RPM.

4. Work in sections of 2–3 sq ft for best results.

5. Allow to dry to a light haze, then wipe off with a clean cotton or microfiber cloth.

6. Buff a second time for maximum depth of gloss.

Pairs with

Use after Aquatech Polishing Compound for full restoration. For heavily oxidized surfaces, precede with Aquatech Buff & Cut Compound.

Good to know

• Avoid direct sunlight and hot surfaces during application

• Not intended for matte or satin finishes

• Safe on boats, yachts, jet skis, and RVs

Aquatech Marine Polishing Compound is a professional-grade polish built for gelcoat, fiberglass, metal, and painted marine surfaces. It removes light-to-moderate oxidation, lifts stains, and restores a clean, reflective gloss in a single step — with built-in UV inhibitors that help the finish resist fading, chalking, and salt corrosion between applications.

What it does

• Removes oxidation, water stains, and minor surface imperfections from gelcoat, fiberglass, metal, and painted boat surfaces

• Restores a deep, uniform gloss without the haze left by cheaper compounds

• UV inhibitors slow chalking and fading, extending the life of the finish

• Repels stains and salt buildup, making future washes faster

• Works by hand with a wax applicator or by machine with a polishing pad

• Safe for boats, yachts, jet skis, and other marine equipment

Specifications

Aquatech Concentrated Marine Cleaner – Powerful Multi-Surface Cleaning & Degreasing

Tackle tough marine grime with Aquatech Concentrated Marine Cleaner, a high-performance, multipurpose spray designed to penetrate and clean a variety of marine surfaces. This versatile cleaner works effectively on fiberglass, vinyl, and nonskid surfaces, making it the ideal solution for routine maintenance and deep cleaning. Whether you're removing dirt, grease, or stains, this powerful formula delivers superior results with ease.

Beyond its deep-cleaning power, Aquatech Concentrated Marine Cleaner also serves as an excellent degreaser, helping to break down oil and grime for a spotless finish. For vinyl surfaces, follow up with Aquatech Marine Vinyl & Soft Top Dressing to restore luster and water repellency.

Why Choose Aquatech Concentrated Marine Cleaner?

✅ Deep-penetrating formula removes dirt, grime, and grease effortlessly
✅ Safe for fiberglass, vinyl & nonskid surfaces – ideal for marine use
✅ Multipurpose cleaner & degreaser for versatile applications
✅ Easy to use – simply spray, wipe, or rinse clean
✅ Perfect for regular maintenance & deep cleaning

How to Use:

1. Spray directly onto a soft cloth or the surface to be cleaned.
2. Wipe or rinse clean to remove dirt and grease.
3. For heavily soiled areas, repeat as needed.
4. If used on vinyl surfaces, follow up with Aquatech Marine Vinyl & Soft Top Dressing for added protection.

⚠️ Important: Always test on an inconspicuous area before full application. Not recommended for glass or plastic enclosures.

Powerful Cleaning for Marine Surfaces – Order Aquatech Concentrated Marine Cleaner Today!